user_mobilelogo

Mini Power Amplifier

 

 

Miniverstärker Stereo Front

 

  • stereo or mono amps available
  • very small and compact design
  • perfect for stationary or portable use
  • input sensitivity is adjusatable in 4 steps
  • no ground loop problems
  • very stable with low impedance
  • no fans or other external cooling necessary
  • very low distortion
  • wide bandwidth
  • balanced XLR and unbalanced RCA inputs
  • very high efficiency

 

 

 

 

 

 

 mono and stereo amplifier rear view:

 Miniverstärker Stereo Rück monoMiniverstärker Stereo Rück2

 

 

 

 

 

 

 

 

 

 

 Technical specs :  Mono amp  Stereo amp
     
 Output 1%THD@1kHz :  200 W 2 x 60W 
 SNR fullrange :  109 dB 106 dB
 SNR a-weighted :  114 dB 110 dB 
 Dynamic range - AES17 :  112 dB 108dB
 Deviation 20Hz - 20kHz :  +/- 0,1 dB  +/- 0,08 dB 
 Frequency range 0dB / -1dB :  10 Hz - 45 kHz  10 Hz - 60 kHz
 Noise @1kHz fullrange :  > 0,005 %  > 0,002 %
 Output impedance (typically) :  14 mohm  14 mohm
 Input impedance (typically) :  47 kohm  47 kohm
     
 Mechanical specs :    
     
 Dimensions (L x W x D) :  182 mm x 104 mm x 56 mm  182 mm x 104 mm x 56 mm
 Weight :  680 g  700g
     

  The technical specs were measured with a selected input sensitivity of 2V and a 4 ohm load on the balanced XLR inputs.

 

 

These little and very lightweight amps are perfectly suited for portable and lab use. In combination with a soundcard and your prefered analyzer software, you receive a very precise and portable analyzer system. Beside of lab use you can also use these small amplifiers for high-end hifi! They sound great!